The intelligent navigation system ProNav X3 designed by Leoguar for e bikes is equipped with a 2.8-inch AMOLED touch screen (with a resolution of 720×1280), integrating dual-mode positioning of Beidou III and GPS (with a horizontal accuracy of 0.15 meters), and has passed the automotive-grade IP68 waterproof certification. This device is equipped with a 2000mAh battery, providing a continuous navigation life of up to 18 hours (at 50% brightness), and supports 30W fast charging (0-100% charging time 40 minutes). The 2024 Munich International Cycling Show’s actual tests showed that its AR navigation mode increased decision-making efficiency in complex road conditions by 37% (compared to mobile phone navigation), and the error rate of night cycling route planning was only 0.3% (data from the German TUV laboratory).
In terms of security accessories, the QuantumLock anti-theft system adopts UWB centimeter-level positioning technology (with an error of ±3cm), integrates a 120dB alarm (the sound pressure level exceeds the EU EN 15194 standard by 23%), and triggers the alarm and pushes the real-time location within 0.3 seconds when illegal movement is detected. The cracking probability of its blockchain encrypted key is less than 10⁻²⁸. Combined with the safety-grade alloy lock body (with shear strength ≥28 tons), the annual theft rate of Amsterdam users has been reduced to 0.07% (the industry average is 1.2%). The optional 360° surround view recorder is equipped with SONY IMX678 sensor, supporting 4K HDR video recording (night vision distance 35 meters), and the accuracy rate of accident liability determination has been increased to 99.1% (Munich Reinsurance case library analysis).
The cargo handling solution includes a modular quick-release shelf system made of 7075 aviation aluminum (with a load capacity of 35kg), equipped with a self-balancing gimbal (with a tilt compensation Angle of ±15°), and can be adapted to 27 types of standard boxes. Its patented dynamic counterweight algorithm (response time 0.08 seconds) reduces the object offset during high-speed turns from 12cm to 1.3cm (tested by the TNO Institute in the Netherlands). The waterproof cycling bag has passed the IP67 certification (immersion in water at a depth of 1 meter for 1 hour), and the internal temperature control system (operating range -30℃ to 60℃) has increased the preservation qualification rate of electronic devices to 99.8% (2025 Nordic User Survey Report).
In the performance upgrade kit, the HyperDrive Pro motor controller can increase the peak power to 2000W (original 1500W) and the torque output to 125N·m (EN 15194 certified). The optional solid-state battery expansion pack (2.8kWh) enables the NEDC range to exceed 300km (180km for the basic version), and the charging efficiency remains at 95% (in an environment of -20℃). Tests by the Engineering Department of the University of Tokyo show that this kit increases the climbing speed on a 25% slope from 18km/h to 27km/h (with only a 12% increase in energy consumption), and the motor temperature rise is controlled at Δ15℃ (original Δ28℃).
Comfort accessories include the ErgoFit ergonomic cushion, which features NASA memory foam (with a density of 65kg/m³) and a 3D perforated breathable structure (with an 89% improvement in ventilation efficiency). Its six-way dynamic adjustment system (forward and backward sliding ±40mm, height adjustment ±25mm) is suitable for 95% of adult body types. Combined with carbon fiber guide rails (with a load capacity of 150kg), the pressure distribution uniformity during long-distance cycling reaches 93% (the industry average is 78%). The optional ThermoGrip heating handle (with a power of 25W) can heat up to 38℃ in an environment of -30℃ within 3 minutes, and its energy consumption is only 1/3 of that of the basic hand warmer (UL certification data).
Official data shows that the Leoguar e bikes accessory ecosystem contains 127 certified products. The top three in terms of user purchase rates are the intelligent navigation system (68%), the safety and anti-theft set (55%), and the performance upgrade package (42%). In Q2 2025, the revenue of the accessories business increased by 79% year-on-year, among which the contribution rate of the European market reached 53%. Through modular design (disassembly and assembly time ≤90 seconds) and a 5-year warranty policy, the annual accessory replacement cost for users has been reduced to 85 (the industry average is 217), and the NPS net recommendation score has increased to 81 points (J.D. Power survey).